Rion NL-27 Sound Level Meter Class 2

Rp 38.000.000

Brand:  Rion

Rion NL-27 Sound Level Meter adalah alat yang digunakan untuk mengukur tingkat tekanan suara atau kebisingan di sekitar kita. Alat ini memiliki tingkat akurasi yang tinggi dan diklasifikasikan sebagai kelas 2 sesuai dengan standar internasional. Hal ini membuatnya cocok digunakan dalam aplikasi yang membutuhkan pengukuran kebisingan yang akurat, seperti di bidang industri, lingkungan kerja, konstruksi, hiburan, dan lain sebagainya.

+ −
  • Rion NL-27 Sound Level Meter Class 2

    Rion NL-27 Sound Level Meter Class 2

    Rp 38.000.000

    Request a Call Back


    Rion NL-27 Sound Level Meter adalah alat yang digunakan untuk mengukur tingkat tekanan suara atau kebisingan di sekitar kita. Alat ini memiliki tingkat akurasi yang tinggi dan diklasifikasikan sebagai kelas 2 sesuai dengan standar internasional. Hal ini membuatnya cocok digunakan dalam aplikasi yang membutuhkan pengukuran kebisingan yang akurat, seperti di bidang industri, lingkungan kerja, konstruksi, hiburan, dan lain sebagainya.

    Rion NL-27 Sound Level Meter adalah alat yang handal dan akurat untuk mengukur tingkat kebisingan di lingkungan sekitar. Dengan fitur-fitur yang canggih dan kemampuan pengukuran yang andal, alat ini sangat berguna dalam mengendalikan dan memantau kebisingan di berbagai aplikasi industri dan lingkungan lainnya.

    FITUR Rion NL-27

    • Kisaran linearitas yang luas; dari 30 hingga 130 dB tanpa peralihan jangkauan.
    • Memulai dengan cepat dan pengoperasian yang mudah untuk mengukur Lp, Leq, Lmax, LE dan LCpeak.
    • Rentang frekuensi: dari 20 Hz hingga 8 kHz
    • Pembobotan frekuensi: A dan C

    SPESIFIKASI Rion NL-27

    Standard compliance General-Purpose Sound Level Meter according to Japan Measurement Law JIS C 1509-1: 2017 class 2,
    IEC 61672-1: 2013 class 2
    CE mark, WEEE Directive
    Measurement functions Processing functions
    (normal mode)
    Sound level Lp, equivalent continuous sound level Leq, sound exposure level LE, maximum sound level Lmax, peak sound level LCpeak (only when peak range was selected)
    Measurement time settings 1 min, 5 min, 10 min, 1 h
    Microphone 1/2 inch electret condenser microphone
    Model: UC-52,
    sensitivity level: -33 dB ± 3 dB (re.1 V/Pa)
    Measurement level
    range (normal mode)
    A-weighting: 30 dB to 137 dB,
    C-weighting: 36 dB to 137 dB
    Linear operation range
    (A-weighting, 1 kHz)
    30 dB to 137 dB
    Peak sound level measurement range 65 dB to 140 dB
    Residual noise level A-weighting: max. 24 dB, C-weighting: max. 30 dB
    Measurement frequency range 20 Hz to 8 kHz
    Reference frequency, reference sound pressure level Reference frequency: 1 kHz,
    reference sound level: 94.0 dB
    Frequency weighting characteristics A-weighting, C-weighting
    Time weighting characteristics F (Fast), S (Slow)
    Level range Wide range: 30 dB to 130 dB, peak range*: 65 dB to 130 dB
    *Peak range is used for peak sound level measurements
    RMS detection method Digital processing
    Processing Digital sampling cycle: 30.3 μs (Lp, Leq, LE, Lmax, Lpeak)
    Calibration Calibration frequency: 1 kHz,
    Calibration sound level: 94 dB
    Japan Measurement Law: electrical calibration with internal
    signal source; JIS, IEC: acoustic calibration using NC-74
    Windscreen Unit is compliant with JIS C 1509-1 class 2 and IEC 61672-1 class 2 with and without windscreen
    Display (TN positive display, reflective) Numeric display: 0.1 dB resolution
    Bar graph: Scale range 100 dB, 5 dB resolution (update frequency 0.1 s)
    Warning indicators: Over (Overload) appears at 137.4 dB
    (1 kHz) Under (Underload) appears from -0.6 dB of lower scale limit Battery capacity 3-stage indicator for remaining capacity
    Store function (processing results saved in internal memory, using manual store) Number of data: 199
    Stored data can be checked on recall screen
    DC output connector DC output: 3 V (full scale), 25 mV/dB, output impedance: 50 Ω
    Load impedance: 10 kΩ or more
    AC monitor output connector AC output: 1 Vrms +600 -400 mVrms (at 110 dB), overload: +2 dB Output impedance: 600 Ω, load impedance: 10 kΩ or more, frequency weighting: Z-weighting
    USB connector For transfer of stored data to a computer, using optional USB adapter cable
    Power requirements
    (size AAA [IEC R03] battery x 2 Normal temperature)
    Current consumption: approx. 80 mA (3 V operation) Battery life: approx. 9 hours (with alkaline batteries),
    (Wide range)approx. 3 hours (with manganese batteries)
    Temperature / humidity range for operation -10 ℃ to +50 ℃, 10 % to 90 % RH (no condensation)
    Dimensions, weight Approx. 120 mm (H) × 63 (W) × 23.5 mm (D), approx. 105 g (including batteries)
    Supplied accessories Windscreen × 1, Windscreen fall prevention rubber× 1,
    Silicone cover × 1, strap × 1, AAA [IEC R03] alkaline battery × 2

    Based on 0 reviews

    0.00 Overall
    0%
    0%
    0%
    0%
    0%
    Be the first to review “Rion NL-27 Sound Level Meter Class 2”

    Your email address will not be published. Required fields are marked *

    Reviews

    There are no reviews yet.

    Q & A

    Ask a question
    There are no questions yet
    SKU: SKU53151 Category: Brand:
    Close
    Categories
    Tags
    Close My Cart
    Close

    Close
    Navigation
    Categories